Identifying the corrosivity category for the design situation is key to decide which coating should be specified.
R51+ | |
---|---|
Coatings | Galv (Z275), HD (ZM310) |
Options | – |
TR60+ | |
---|---|
Coatings | Galv (Z275), HD (ZM310) |
Options | – |
TR80+ | |
---|---|
Coatings | Galv (Z275), HD (ZM310), Plastisol (PF) |
Options | Crushed Ends |
TR220 | |
---|---|
Coatings | Galv (Z275), Interior Liner |
Options | – |
SR30+ | |
---|---|
Coatings | Galv (Z275), HD (ZM310), Interior Liner |
Options | – |
SR35+ | |
---|---|
Coatings | Galv (Z275), HD (ZM310), Interior Liner |
Options | – |
SR60+ | |
---|---|
Coatings | Galv (Z275), HD (ZM310), Interior Liner |
Options | Perforated |
SR100+ | |
---|---|
Coatings | Galv (Z275), HD (ZM310), Interior Liner |
Options | Perforated |
SR135 | |
---|---|
Coatings | Galv (Z275), HD (ZM310), Interior Liner |
Options | Perforated |
SR153 | |
---|---|
Coatings | Galv (Z275), HD (ZM310), Interior Liner |
Options | Perforated |
SR158 | |
---|---|
Coatings | Galv (Z275), HD (ZM310), Interior Liner |
Options | Perforated |
SR200 | |
---|---|
Coatings | Galv (Z275), HD (ZM310), Interior Liner |
Options | Perforated |
All SMD decks are manufactured from galvanised steel coil to BS EN 10346 with a standard 275g/m² (S350GD-Z275) coating which equates to 0.02mm (20μm) per face. Although the galvanising provides a protective coating, it does weather, albeit at approximately one tenth of the rate of bare steel (depending upon the prevailing conditions).
The environment in which the material will be located must be carefully assessed to determine which option is most suitable for your project.
Should our standard coating not meet the requirements of your project, we have developed a number of enhanced coating options to provide higher durability, reflectivity and aesthetic appearance where required.